BSZCW - INSWOOL MOLDABLE
- MSDS: BSZCW
- Manufacturer: A P GREEN INDUSTRIES INC
- Product Name: INSWOOL MOLDABLE
- National Stock Number: 9350-00F032223
Product Identification
Product ID:INSWOOL MOLDABLE
MSDS Date:01/28/1993
FSC:9350
NIIN:00F032223
MSDS Number: BSZCW
Responsible Party
MEXICO, MO 65265-2582
US
Emergency Phone: 314-473-3626
Info Phone: 314-473-3626
Preparer: ELLIS J SMITH
Cage: 84446
Contractor
Telephone: 573-473-3626
Cage: 84446
Ingredients
REFRACTORIES FIBERS, ALUMINOSILICATE
CAS: 142844-00-6
SILICON DIOXIDE, CELITE 322
CAS: 7631-86-9
RTECS: VV3100000
OSHA PEL 80 MG/CUM
ACGIH TLV: 0.2 MG/CUM
ETHYLENE GLYCOL, GLYCOL
CAS: 107-21-1
RTECS: KW2975000
ACGIH TLV: C 127 MG/CUM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES & SKIN: IRRITATION. INHALATION:
UPPER RESPIRATORY IRRITATION. CHRONIC INHALATION: LUNG DAMAGE.
Explanation of Carcinogenicity:NONE
First Aid
First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T INDUCE VOMITING
UNLESS INSTRUCTED BY A PHYSICIAN. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
Fire Fighting
Flash Point:NONE
Fire Fighting Procedures:NOT COMBUSTIBLE
Accidental Release
Spill Release Procedures:SCOOP UP & PLACE IN CONTAINER. WATCH FOR
SLIPPERY CONDITIONS.
Handling
Other Precautions:CONTACT LENSES SHOULDN'T BE WORN WHILE HANDLING THIS
PRODUCT.
Exposure Controls
Respiratory Protection:NOT NORMALLY NEEDED WHEN PRODUCT IN PASTE FORM;
HOWEVER, WHEN DRYED DUST FORM OR WHEN HEATED >1800F, A NIOSH
APPROVED RESPIRATOR SHOULD BE WORN.
Ventilation:GENERAL MECHANICAL ADEQUATE
Protective Gloves:RUBBER
Eye Protection:GOGGLES, SAFETY GLASSES W/SIDE SHIELDS
Other Protective Equipment:LONG SLEEVED, LONG LEGGED CLOTHING.
Supplemental Safety and Health
WORK CLOTHING SHOULD BE WASHED SEPARATELY & THE WASHING MACHINE
THOROUGHLY CLEANED AFTER USE.
Chemical Properties
Spec Gravity:2.2
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE TO OFF-WHITE FIBERS IN MOLDABLE PASTE, NO
ODOR
Percent Volatiles by Volume:25-35
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS, ALKALIS, SALTS
Stability Condition to Avoid:FREEZING
Hazardous Decomposition Products:WHEN TEMPERATURE >1800F, CRISTOBALITE
IS FORMED, WHICH IS A SILICA IDENTIFIED BY IARC AS CLASS 2A
CARCINOGEN.
Disposal
Waste Disposal Methods:DISPOSE IN LANDFILL I/A/W LOCAL, STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.